Philips Dynalite DBC1210 12 Channel Ballast Controller
Philips Dynalite DBC1210 is designed for use with DALI, 1-10V and DSI electronic dimmable fluorescent ballasts and transformers. Philips Dynalite DBC1210 has 12 x 10A relay outputs, to switch fluorescent lighting or other loads in a DyNet energy management system.
Twelve control outputs, selectable to DALI Broadcast, 1-10V and DSI are provided for control of HF ballasts.
• 400/230V ±14% 50/60Hz 3-Phase Y at 40A
• 12 switched outputs at 10A
• 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI
• Maximum total load 120A
• Output capacity – DALI mode: 64 DALI ballasts per channel, up to a maximum of 400, DSI mode: 100 ballasts per channel, up to a maximum of 1,200, 1-10V mode: 50mA sink/source per channel
• Each output protected by a 10A MCB
• 1 x RS485 DyNet serial port
• 1 x programmable dry contact AUX input
• Dynalite Accessory Module Enabled
• Dimensions H 457mm x W 252mm x D 126mm
• Packed weight – 10.25kg
- Description
Description
Philips Dynalite DBC1210 is designed for use with DALI, 1-10V and DSI electronic dimmable fluorescent ballasts and transformers. Philips Dynalite DBC1210 has 12 x 10A relay outputs, to switch fluorescent lighting or other loads in a DyNet energy management system.
Twelve control outputs, selectable to DALI Broadcast, 1-10V and DSI are provided for control of HF ballasts.
• 400/230V ±14% 50/60Hz 3-Phase Y at 40A
• 12 switched outputs at 10A
• 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI
• Maximum total load 120A
• Output capacity – DALI mode: 64 DALI ballasts per channel, up to a maximum of 400, DSI mode: 100 ballasts per channel, up to a maximum of 1,200, 1-10V mode: 50mA sink/source per channel
• Each output protected by a 10A MCB
• 1 x RS485 DyNet serial port
• 1 x programmable dry contact AUX input
• Dynalite Accessory Module Enabled
• Dimensions H 457mm x W 252mm x D 126mm
• Packed weight – 10.25kg
