EBR-LCM10-10DD
EBR-LCM10-10DD |
Pluggable LCM, up to 22 drivers/ballasts, 8 x DALI/DSI digital dimming channels |
The standard EBR-LCM10-10DD RAPID LCM has 8 individually addressable outputs to allow for fully independent control of DALI/DSI or switching only fittings. Its modular design allows you to specify for Cat A and is expandable for CatB by using a 4 output plug-in module, providing an extra 4 outputs. In turn, this reduces the cost to fit out stage.
Installation and Connectivity
The system is designed for ease of installation with mains and field bus wiring being connected using the spacious wiring compartment. There are 4 M6 keyways for fixing to the slab in the ceiling void or channel nut fixings for rod suspension or fixing to cable basket. There are a total of 11 SELV switch inputs, 6 in the wiring compartment with screw terminals and 7 via an RJ45 port. This allows for multiple switch interface options in relation to each output channel.
There are also 2 RJ45 ports for connection of detectors and /or scene plate and also 2 RJ45 ports for CAN-BUS networking. Protocol Flexibility The plug in module is available in a number of formats and allows the designer and installer to mitigate the cost of allowing for future expansion on the fit-out stage.
The module can incorporate a different dimming protocol from the main LCM and also volt free contacts for switching fixed output loads like fan coil units. This is ideal for fit-out scenarios where cellular offices are added creating the requirement for additional outputs for luminaires. The ability to have a different dimming protocol from the main LCM is also useful where, during the fit-out, LED lighting may have been installed which is 1-10V and where an existing LCM is either DALI or DSI. The 4 outputs are also individually addressable allowing for maximum flexibility.
- Description
Description
EBR-LCM10-10DD |
Pluggable LCM, up to 22 drivers/ballasts, 8 x DALI/DSI digital dimming channels |
The standard EBR-LCM10-10DD RAPID LCM has 8 individually addressable outputs to allow for fully independent control of DALI/DSI or switching only fittings. Its modular design allows you to specify for Cat A and is expandable for CatB by using a 4 output plug-in module, providing an extra 4 outputs. In turn, this reduces the cost to fit out stage.
Installation and Connectivity
The system is designed for ease of installation with mains and field bus wiring being connected using the spacious wiring compartment. There are 4 M6 keyways for fixing to the slab in the ceiling void or channel nut fixings for rod suspension or fixing to cable basket. There are a total of 11 SELV switch inputs, 6 in the wiring compartment with screw terminals and 7 via an RJ45 port. This allows for multiple switch interface options in relation to each output channel.
There are also 2 RJ45 ports for connection of detectors and /or scene plate and also 2 RJ45 ports for CAN-BUS networking. Protocol Flexibility The plug in module is available in a number of formats and allows the designer and installer to mitigate the cost of allowing for future expansion on the fit-out stage.
The module can incorporate a different dimming protocol from the main LCM and also volt free contacts for switching fixed output loads like fan coil units. This is ideal for fit-out scenarios where cellular offices are added creating the requirement for additional outputs for luminaires. The ability to have a different dimming protocol from the main LCM is also useful where, during the fit-out, LED lighting may have been installed which is 1-10V and where an existing LCM is either DALI or DSI. The 4 outputs are also individually addressable allowing for maximum flexibility.
